Piston pumps
FOX FDA
Contacts
Downloads
Air operated piston pump to transfer medium viscosity fluids.
Robust design, designed to last through time and to be maintained.
Robust design, designed to last through time and to be maintained.
-
extremely robust and long lasting
-
fluid side in stainless steel AISI 316
-
ptfe gaskets
-
absence of superfluous gaps
-
lateral piston coupling without threads
Specifications
Configurations
Dimensions
Downloads
The technical specifications of the products in this catalogue are not binding and may be changed without notice.
Specifications
Technical features
Pressure ratio
3 : 1
Typology
Double Effect
Self priming
Yes
Max flow rate
[l/min] *
30
Outlet Port
[Gas]
DN25 high pressure clamp
Inlet port
[Gas]
DN25 high pressure clamp
Max cycles per minute
75
Air volume per cycle
[dm^3]
0,33
Air consumption at max cycles
[Nl/min]
25
Air inlet port
[Gas]
1/4”
Air inlet pressure
[bar]
1 / 7
Fluid side valves
Ball AISI 316
Noise
[db] **
<78
Maximum fluid pressure delivered with admitted maximum pneumatic pressure
[bar]
20
Weight
[Kg]
13,6
* Performance tests are conducted in laboratory processing water at 6 bar pressure.
Flow rate regulation through flow valve on fluid outlet, flow valve and pneumatic supply pressure regulator and/or integrated air exhaust regulators.
** The noise level is detected in a specific condition of use.
Component Materials Configuration
Wetted materials
Outlet body,cilinder, suction housing - AISI 316 - Electropolished
Internal Static thread protection Seals - PTFE
Clamp gaskets - PTFE
Plunger gasket - PTFE with stainless steel spring protected by PTFE ring. Open groove installation
Piston gasket - PTFE slide energized by EPDM O-Ring. Closed groove installation
Removable Fluid Side - 2” high pressure clamp
Outlet connection - Screwed, with PTFE seal for thread protection
Piston - Removable, connected by mechanical coupling. Plunger threaded connection is protected by a PTFE gasket
Suction housing ball stop - Removable disk
Gasket pack - Removable cartridge
Outlet body, cilinder, suction housing - Stainless steel 3.1 FDA piston and plunger seals
Internal Static thread protection Seals - PTFE
Clamp gaskets - PTFE
Plunger gasket - PTFE with stainless steel spring protected by PTFE ring. Open groove installation
Piston gasket - PTFE slide energized by EPDM O-Ring. Closed groove installation
Removable Fluid Side - 2” high pressure clamp
Outlet connection - Screwed, with PTFE seal for thread protection
Piston - Removable, connected by mechanical coupling. Plunger threaded connection is protected by a PTFE gasket
Suction housing ball stop - Removable disk
Gasket pack - Removable cartridge
Outlet body, cilinder, suction housing - Stainless steel 3.1 FDA piston and plunger seals
Configurations
Dimensions
Downloads
Datasheet
pdf
Why choose PCHEM?
Discover the difference.